Society of West-Coast Artists
RULES ON FRAMING FOR SWA SHOWS
SWA Judges look at frames and matting along with your artwork. Many times, paintings are not accepted into shows due to poor framing and matting. Before you bring in your painting check the overall look of your artwork. Artists have brought in paintings with frames that don’t compliment the painting or are scratched/chipped, artwork falling out of frames, dirty or spotted mats, buckled watercolor paintings, dirty glass, etc. Use one solid wire on your paintings to hang. One watercolor artist used 2 pieces attached to the flat hangers and wound them together in the middle. The wires eventually slipped apart, and the painting fell, destroying the glass.
SWA is a professional organization. Make your artwork look as professional as possible!
FRAMING RULES
Size: Frame outside dimensions for all paintings are limited to:
SIZE: Minimum size 10” a side OR 100 sq Inches in area and a maximum no larger than 48” or 2304 Sq inch in area, including frame. The same painting may be entered in only two non-consecutive shows, plus one Annual Show. (ANNUAL EXHBITION ONLY - Including frame - 16 inches minimum size on all sides or 256 square inches in area. Maximum 60 inches a side or 3600 square inches in area.)
Metal Frames – full sheet of watercolor (22”x30”) or larger must use Plexiglas in metal frames.
Hardware – Hardware for hanging must be flat type. SEE PHOTOS BELOW
No nails, eye screws, or protruding hardware allowed.
Wires – All paintings must be wired for hanging. Use one piece of wire for hanging. Hanger wires ends must be taped or covered with plastic sleeves or tape.
Paper Artwork - must be properly mounted to support or substrate. No scotch tape or other visible adhesives allowed.
Works on Canvas or Panel - Must be securely mounted within frame rabbet. Taping artwork into frame is not allowed.
No oil paintings under glass/Plexiglas.
No paintings over photographs.
All artwork MUST be dry. Wet paintings will not be accepted.
